Aqua One AquaZone 매뉴얼 - 페이지 5

{카테고리_이름} Aqua One AquaZone에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua One AquaZone 9 페이지.

Filter Set Up

1. Place the powerhead inside the aquarium and then

feed the Powerheads plug out of the aquarium through the

square cut out, Fig 1 (a). Tip, feed the plug through at an

angle with the plugs pins facing towards you.

2. You can now clip the powerhead into place in the square

cut out, Fig 1 (a).

3. Attach the powerhead adaptor pipe, through the small

circle cut out Fig 1 (c), to the top of the powerhead.

4. Attach the spray bar to the elbow. Ensure the spray bar

holes are at the bottom facing down.

5. Insert the spray bar into the circular part cut out, Fig 1

(b) in the media section of the ﬁ lter tray compartment. Then

attach the elbow to the powerhead adaptor pipe.

6. Attach the strainer to the strainer connector and then

connect to the intake pipe.

7. Attach the intake pipe to the bottom of the powerhead.

Please note, the intake pipe can be cut to desired length.

Your Filter should now be set up as in Fig 2.

8. If desired, to help with aeration, a venturi valve is also

included with your ﬁ lter parts. To connect this, ﬁ rst remove

the small black cover from the venturi ﬁ tting on the front of

the powerhead, Fig 3. Then attach the ﬂ exible transparent

venturi pipe. The venturi valve can then be passed through

the cut out, Fig 1 (a) and sit outside of the aquarium.

Fig 1.

(b)

Venturi Valve

Venturi ﬁ tting

(a)

(c)

Fig 3.

Power head

Spray Bar

Power head

adaptor pipe

Power head

Intake pipe

Strainer

connector

Strainer

Fig 2.

Elbow

Power head

Intake pipe

Strainer