Allied Systems Long Reach BHA Series 설치 유지보수 및 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Allied Systems Long Reach BHA Series에 대한 설치 유지보수 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Systems Long Reach BHA Series 20 페이지. Billet handler

페이지 인쇄

3. Inspect installation to make sure hoses are not kinked

or pinched between the truck carriage and attachment.

4. Operate the attachment continuously for several

minutes to determine that all hydraulic connections

are secure with no leaks, and to remove any air in the

hydraulic system.

Notice

Equipment damage and loss of performance

could result if air is trapped in the hydraulic

system.

Activate the hydraulic functions several

times after hydraulic service has been

performed, to bleed trapped air out of the

system before returning attachment to

service.

45-053, REV. 5/18

5. With the mast in the vertical position, open the attach-

ment arms all the way. If you are working with a paper

roll clamp, close the arms all the way. Now check that

the truck's hydraulic oil reservoir level is at the recom-

mended level.

6. Before placing the attachment in operation check the

following:

A. Inspect all hoses and fittings for leaks and routing

clearance. Be sure to include clearance of jumper

hoses to the mast.

B. Check the valve and cylinder for leaks.

C. Check cotter pins at each end

of the cylinder for security.