Allied Systems Long Reach BHA Series Handleiding voor installatie, onderhoud en service - Pagina 15

Blader online of download pdf Handleiding voor installatie, onderhoud en service voor {categorie_naam} Allied Systems Long Reach BHA Series. Allied Systems Long Reach BHA Series 20 pagina's. Billet handler

Pagina afdrukken

3. Inspect installation to make sure hoses are not kinked

or pinched between the truck carriage and attachment.

4. Operate the attachment continuously for several

minutes to determine that all hydraulic connections

are secure with no leaks, and to remove any air in the

hydraulic system.

Notice

Equipment damage and loss of performance

could result if air is trapped in the hydraulic

system.

Activate the hydraulic functions several

times after hydraulic service has been

performed, to bleed trapped air out of the

system before returning attachment to

service.

45-053, REV. 5/18

5. With the mast in the vertical position, open the attach-

ment arms all the way. If you are working with a paper

roll clamp, close the arms all the way. Now check that

the truck's hydraulic oil reservoir level is at the recom-

mended level.

6. Before placing the attachment in operation check the

following:

A. Inspect all hoses and fittings for leaks and routing

clearance. Be sure to include clearance of jumper

hoses to the mast.

B. Check the valve and cylinder for leaks.

C. Check cotter pins at each end

of the cylinder for security.