Aqua One Oakstyle 110 조립 지침 매뉴얼 - 페이지 16

{카테고리_이름} Aqua One Oakstyle 110에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua One Oakstyle 110 20 페이지.

페이지 인쇄
Aqua One Oakstyle 110 조립 지침 매뉴얼
Step 28
This unit must be fixed to a wall using
Secure the unit to a
the Overbalance Protector Kit provided
wall
a:
Before fitting the unit
to a wall, use a spirit
level to check the top of
a:
the unit is level,
front-to-back and
side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level.
To prevent possible
Top
overbalancing this unit
must be secured to a
b:
Q
Q
suitable wall by fitting the
Overbalance Protector
Kit to a wall.
b:
Push the unit up
against the wall and slide
the Bracket against the
wall. Fit the 2nd Screw
from the kit into the
underside of the Top
Q
panel.
Mark the slot at the back
of the Bracket for drilling
into the wall.
Wall fixings are not
supplied as they will need
to suit the wall type.
Take care when drilling
the wall that you do not
drill into any pipes, wires
etc. If in doubt, consult an
expert.