Aqua One Oakstyle 110 Assembly Instructions Manual - Page 16
Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing Aqua One Oakstyle 110. Aqua One Oakstyle 110 20 pages.
Print Page
Step 28
This unit must be fixed to a wall using
Secure the unit to a
the Overbalance Protector Kit provided
wall
a:
Before fitting the unit
to a wall, use a spirit
level to check the top of
a:
the unit is level,
front-to-back and
side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level.
To prevent possible
Top
overbalancing this unit
must be secured to a
b:
Q
Q
suitable wall by fitting the
Overbalance Protector
Kit to a wall.
b:
Push the unit up
against the wall and slide
the Bracket against the
wall. Fit the 2nd Screw
from the kit into the
underside of the Top
Q
panel.
Mark the slot at the back
of the Bracket for drilling
into the wall.
Wall fixings are not
supplied as they will need
to suit the wall type.
Take care when drilling
the wall that you do not
drill into any pipes, wires
etc. If in doubt, consult an
expert.