AVPro Edge AC-CXWP-VGA-100KIT 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} AVPro Edge AC-CXWP-VGA-100KIT에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVPro Edge AC-CXWP-VGA-100KIT 4 페이지. Wall plate transmitters

AC-CXWP-VGA-100KIT

When paired with the AC-EX100-UHD-R3

the wall plates are able to transmit 4K

at 70 meters or 1080P at 100 meters. EDID

management is available on this receiver.

AC-CXWP-VGA-70KIT

When paired with the AC-EX70-UHD-R the wall plate is

able to transmit 4K at 40 meters 1080P at 70 meters.

EDID management is not available for this receiver but

is still available on the wall plate.

Installation of the Wall Plate Extenders and connection order:

Connect category cable between the Wall Plate and the Receiver*

Plug in the power into the Receiver. The Wall Plate Transmitter

will receive power from the receiver through the Cat Cable (POE)**

Plug in a HDMI cable from the receiver to the display.

Last step: plug in a HDMI or VGA from the source to wall plate.

Source will now transmit to display.

*If the Cat Cable is connected correctly a solid amber light with a flashing

green light will turn on at the ethernet port. This means there is a

good link and that data is being transmitted between the wall plate and

receiver.

**If you will be using the unit directly into a NON POE Provider (AVR,

Projector, Display, or other HDBaseT receiver), you can power it using a 5V

MINI uSB Type power supply. We recommend the AC-PSU-5V-MINI-USB.