AVPro Edge AC-CXWP-VGA-100KIT Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Передатчик AVPro Edge AC-CXWP-VGA-100KIT. AVPro Edge AC-CXWP-VGA-100KIT 4 страницы. Wall plate transmitters
Печатать страницуAC-CXWP-VGA-100KIT
When paired with the AC-EX100-UHD-R3
the wall plates are able to transmit 4K
at 70 meters or 1080P at 100 meters. EDID
management is available on this receiver.
AC-CXWP-VGA-70KIT
When paired with the AC-EX70-UHD-R the wall plate is
able to transmit 4K at 40 meters 1080P at 70 meters.
EDID management is not available for this receiver but
is still available on the wall plate.
Installation of the Wall Plate Extenders and connection order:
1)
Connect category cable between the Wall Plate and the Receiver*
2)
Plug in the power into the Receiver. The Wall Plate Transmitter
will receive power from the receiver through the Cat Cable (POE)**
3)
Plug in a HDMI cable from the receiver to the display.
4)
Last step: plug in a HDMI or VGA from the source to wall plate.
5)
Source will now transmit to display.
*If the Cat Cable is connected correctly a solid amber light with a flashing
green light will turn on at the ethernet port. This means there is a
good link and that data is being transmitted between the wall plate and
receiver.
**If you will be using the unit directly into a NON POE Provider (AVR,
Projector, Display, or other HDBaseT receiver), you can power it using a 5V
MINI uSB Type power supply. We recommend the AC-PSU-5V-MINI-USB.