Aqua PRO ECO550 설치 및 사용자 설명서 - 페이지 9

{카테고리_이름} Aqua PRO ECO550에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua PRO ECO550 20 페이지. Swimming pool heat pump
Aqua PRO ECO550에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (20 페이지)

페이지 인쇄

3) WARNING: Before obtaining access to terminals, all supply circuits must be

disconnected.

4) 5-6 terminal: Customer remote control switch connector, to reach automation

control through 2-wire dry contact connection, and only control the unit

On/Off.

Options for protecting devices and cable specification

MODEL

Breaker

Fuse

Power Cord

Signal cable

※ Above data is subject to modification without notice.

Note: The above data is adapted to power cord ≤ 10 m. If power cord is

＞10 m, wire diameter must be increased. The signal cable can

be extended to 50 m at most.

Installation and Requirements

The swimming pool heater must be installed by a pool professional. End

users are not qualified to install the heater. Damage may occur to the

heater or threaten the safety of the user.

A. Installation

1) The swimming pool heater should be installed in a location with good

ventilation;

2) The frame must be fixed by bolts (M10) to concrete foundation or

brackets. The concrete foundation must be solid and fastened; the

Jumper is installed by default, if loosen or

disconnection "OFF" will display.

Rated Current A

Rated Residual

Action Current mA

(AWG)

ECO550

15.5

3x13

3x20

ECO900

3x10

3x20