Aqua Quip Twister 설치 지침

{카테고리_이름} Aqua Quip Twister에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Quip Twister 4 페이지.
Aqua Quip Twister에 대해서도 마찬가지입니다: 설치 및 사용 설명서 (4 페이지)

Installation Instructions

1) Switch off your pool pump and check that your baskets and filter are clean, and that your pool

cleaner hoses are not leaking from splits or abrasion.

2) Cut your pool hose with knife or hack saw, 10cm (4") from the skimmer box. If you have an In-Line

Leaf Canister, then see notes below.

3) Submerge Twister until full of water. Fit Twister between these two cut sections of hose. Twister

must be installed with the correct side facing upwards and the correct end facing the pool cleaner.

Refer to the arrows and markings on the Twister to ensure correct orientation. Additional installation

photos appear on the outside of the box.

4) Top of Twister should locate no more than 20mm above water level. If adjustments are required to

the skimmer box connections to keep your hose and Twister at the correct height, then contact your

local Twister dealer.

5) Fit the Angled Adaptor between your pool cleaner and your hose. Place the pool cleaner back in

the pool, fill the hose with water so that all air is removed.

6) With the Twister, hoses, angled adaptor and cleaner fitted and free of air, switch on your pool

pump and watch your pool cleaner reach places it never reached before, without getting stuck in cor-

ners.

7) Your installation is now complete.

 

Twister will not fix a pool cleaner's performance if the cleaner has defective or worn compo-

nents, or if the hoses are kinked, cracked or otherwise need replacing.

 

Twister is only suitable for suction style pool cleaners that have a swivel hose connection.

 

If Twister is being installed on a hose that is fitted with an In Line Leaf Canister, then ensure

that the leaf canister is installed between the Twister and the skimmer box.

Please Note:

Congratulations on decid-

ing to Power Steer your

pool cleaner with Twister,

ensuring your pool cleaner

never gets stuck again!

To install your Twister,

please carefully follow the

steps inside and thank you

for purchasing this Austra-

lian Designed product.

Patents Pending: WO

2006-0886840, AU

2006905783