Aqua Quip Twister 설치 지침 - 페이지 4

{카테고리_이름} Aqua Quip Twister에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Quip Twister 4 페이지.
Aqua Quip Twister에 대해서도 마찬가지입니다: 설치 및 사용 설명서 (4 페이지)

How does Twister work?

Twister is powered by the constant flow of water through the pool cleaner hose. A

paddle wheel spins inside the Twister and transfers drive to the pool hose, counter-

rotating the hose about 3 times per hour. This counter-rotation swivels the Angled

Adaptor on the pool cleaner, thus continually changing the direction of the hose,

steering the pool cleaner out of awkward corners and ensuring a constantly varied

cleaning pattern. By rotating the hose, the abrasion from the pool sides and the deg-

radation by the sun's UV rays are now spread evenly around the hose, thus greatly

reducing this damage and saving you money.

Troubleshooting

 

If Twister's rotating action stops, please check the basics: Backwash the filter,

empty all leaf baskets, check the pool cleaner for obstructions and adjust the

pool cleaner's flow controller.

 

Like your suction cleaner, on occasions, some debris may get stuck in the

Twister. This can be easily dislodged by removing the hose from the inlet end

and washing it through with your garden hose.

 

Twister relies on the pool cleaner's built-in swivel (located at the top of the pool

cleaner) to be operating properly. If this swivel is jammed, the cleaner will need

to be serviced.

Warranty

 

Twister is warranted for 12 months against faulty parts and workmanship. In

case of warranty claim, Twister should be returned to place of purchase for ap-

praisal. Aqua-Quip reserves the right to repair or replace warrantable compo-

nents. Aqua-Quip does not provide on site service work.