DFI EC532-SD 설치 매뉴얼 - 페이지 2

{카테고리_이름} DFI EC532-SD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFI EC532-SD 9 페이지.

Installing a 2.5" SATA Drive

1. The SATA drive bay can be easily accessed witout opening the system.

However, the system does not support hot-swapping hard drives; turn off the

system first. Locate the drive bay on the front panel and open it by releasing

the handle.

2. Slide the HDD into the drive bay. Note that the HDD should be positioned

vertically with the SATA power connector on top of the data connector to

correctly engage with the system's SATA connectors. Then close the drive bay

and lock the handle.

Notes:

The slot is desgined to exactly fit a 2.5" SATA drive with 7mm thickness; it

cannot fit SATA drives with other sizes.

Do not force to close the drive bay if the HDD is not correctly inserted.

SATA drive bay

SATA 2 SATA 1

Drive bay handle

SATA power

Connecotr

SATA power/data cable