DFI EC532-SD Installation Manual - Page 2
Browse online or download pdf Installation Manual for Industrial PC DFI EC532-SD. DFI EC532-SD 9 pages.
Print Page
Installing a 2.5" SATA Drive
1. The SATA drive bay can be easily accessed witout opening the system.
However, the system does not support hot-swapping hard drives; turn off the
system first. Locate the drive bay on the front panel and open it by releasing
the handle.
2. Slide the HDD into the drive bay. Note that the HDD should be positioned
vertically with the SATA power connector on top of the data connector to
correctly engage with the system's SATA connectors. Then close the drive bay
and lock the handle.
Notes:
1.
The slot is desgined to exactly fit a 2.5" SATA drive with 7mm thickness; it
cannot fit SATA drives with other sizes.
Do not force to close the drive bay if the HDD is not correctly inserted.
2.
SATA drive bay
SATA 2 SATA 1
Drive bay handle
SATA power
Connecotr
SATA power/data cable
2