DFRobot Veyron 매뉴얼 - 페이지 7

{카테고리_이름} DFRobot Veyron에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DFRobot Veyron 14 페이지. Veyron servo driver 24-channel



Servo 5V power supply



9V power supply logic

Veyron requires an external power supply to support the servo

How to drive the board from Serial port

In this section, we will use Arduino IDE as a Serial port communication tool to control the servo.

And, you also could use other Serial port software, like putty, CoolTerm etc.

Connect Micro USB cable to the Veyron Servo Driver 24-Channel, then the power indicator

LED will be on. Connect an external 5V power to the VS and GND. Then switch the DIP 3 at

SERIAL, USB has been defaulted to 57600 baudrate (cannot be changed), should be consistent

with software.

Open you Arduino IDE, click "Tools", select your board Serial port, and open the Serial monitor.

Select "Carriage return",and the right baudrate.