DFRobot Veyron Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Сервоприводи DFRobot Veyron. DFRobot Veyron 14 сторінок. Veyron servo driver 24-channel



Servo 5V power supply



9V power supply logic

Veyron requires an external power supply to support the servo

How to drive the board from Serial port

In this section, we will use Arduino IDE as a Serial port communication tool to control the servo.

And, you also could use other Serial port software, like putty, CoolTerm etc.

Connect Micro USB cable to the Veyron Servo Driver 24-Channel, then the power indicator

LED will be on. Connect an external 5V power to the VS and GND. Then switch the DIP 3 at

SERIAL, USB has been defaulted to 57600 baudrate (cannot be changed), should be consistent

with software.

Open you Arduino IDE, click "Tools", select your board Serial port, and open the Serial monitor.

Select "Carriage return",and the right baudrate.