DG FPGA 설정 - 페이지 9

{카테고리_이름} DG FPGA에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. DG FPGA 20 페이지.
DG FPGA에 대해서도 마찬가지입니다: 설정 (5 페이지), 설정 (14 페이지), 설정 (8 페이지), 설정 (10 페이지), 설정 (18 페이지)

페이지 인쇄
DG FPGA 설정
dg_toeudp25gip_fpgasetup_xilinx.doc
b) KCU116: Insert 25G SFP28 AOC cable between FPGA board (on the left-most
channel) and 25Gb Ethernet card on Test PC, as shown in Figure 2-6.
Figure 2-6 25Gb connection on KCU116 board by 25G SFP28 AOC
4) Connect another side of cable with 25Gb Ethernet card of PC.
5) Power on FPGA board.
6) KCU116 board and U250 Card: Open Serial console and download configuration file with
firmware by following step.
i) Open Serial console. When connecting FPGA board to PC, many COM ports from
FPGA connection are detected and displayed on Device Manager. Select Standard
COM port.
On Serial console, use following setting: Buad rate=115,200, Data=8-bit, Non-Parity,
and Stop=1.
7-Jun-21
Figure 2-7 COM port number for Serial console
Page 9