DG FPGA Pengaturan - Halaman 9

Jelajahi secara online atau unduh pdf Pengaturan untuk Perangkat Keras Komputer DG FPGA. DG FPGA 20 halaman.
Juga untuk DG FPGA: Pengaturan (5 halaman), Pengaturan (14 halaman), Pengaturan (8 halaman), Pengaturan (10 halaman), Pengaturan (18 halaman)

Halaman Cetak
DG FPGA Pengaturan
dg_toeudp25gip_fpgasetup_xilinx.doc
b) KCU116: Insert 25G SFP28 AOC cable between FPGA board (on the left-most
channel) and 25Gb Ethernet card on Test PC, as shown in Figure 2-6.
Figure 2-6 25Gb connection on KCU116 board by 25G SFP28 AOC
4) Connect another side of cable with 25Gb Ethernet card of PC.
5) Power on FPGA board.
6) KCU116 board and U250 Card: Open Serial console and download configuration file with
firmware by following step.
i) Open Serial console. When connecting FPGA board to PC, many COM ports from
FPGA connection are detected and displayed on Device Manager. Select Standard
COM port.
On Serial console, use following setting: Buad rate=115,200, Data=8-bit, Non-Parity,
and Stop=1.
7-Jun-21
Figure 2-7 COM port number for Serial console
Page 9