DG NVMe-IP 지침

{카테고리_이름} DG NVMe-IP에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DG NVMe-IP 18 페이지. Linux demo
DG NVMe-IP에 대해서도 마찬가지입니다: 데모 지침 (20 페이지)

dg_nvmeip_linux_instruction_intel_en.doc

This document describes the instruction to run NVMe-IP demo with Angstrom Linux 2014.12 OS

on Arria10 SoC Development board. The demo is designed to get Identify data, write data, and

read data with NVMe SSD. User controls test operation through Serial Console. To run the demo,

FPGA configuration file as image file is prepared in microSD card. After that, install microSD card

to FPGA board for configuration after power on board.

1 Environment Requirement

To demo NVMe-IP Linux demo on IntelFPGA board, please prepare the following

hardware/software.

1) IntelFPGA board: Arria10 SoC Development board

2) PC with Serial console software, i.e. HyperTerminal

3) Power adapter of IntelFPGA board

4) NVMe SSD

5) 4 GB or bigger microSD card with demo image file, downloaded from

http://www.dgway.com/NVMe-IP_A_E.html

6) miniUSB cable for Serial communication

19-Feb-18

NVMe-IP Linux Demo Instruction

Rev1.0 19-Feb-18

Page 1