Avsl 952.010UK 사용자 설명서 - 페이지 3
{카테고리_이름} Avsl 952.010UK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avsl 952.010UK 4 페이지. Rechargeable megaphone
페이지 인쇄
Rear control panel
Setting up
To operate the RM10 megaphone, it will be necessary to insert the supplied Lithium-ion cell into the rear
battery compartment and make sure it is charged firstly.
Before inserting the battery, set both the TALK and SIREN buttons (3, 7) to the "out" position.
To access the rear battery compartment, press the battery compartment release button (5) and the rear
section of the megaphone will flip upwards to reveal the battery holder.
Load in the 18650 Lithium-ion cell negative (-) end first, leaving the positive (+) button facing outward.
Fold down the rear section to cover the battery compartment until it clicks firmly shut.
Connect the supplied USB to DC plug lead to a USB port or charger that has a current capacity of 500mA
or more and connect the DC plug end to the 5V power inlet on the RM10 rear panel (2).
The CHG indicator (5) will light to show that charging is in progress.
When the battery is full, the FULL indicator (6) will light to confirm this.
1.
Power ON LED indicator
2.
5Vdc power inlet
3.
TALK button (power on/off)
4.
Microphone
5.
CHG (charging) LED indicator
6.
FULL (charged) LED indicator
7.
SIREN on/off button
8.
VOLUME control
9.
Battery compartment release button
952.010UK User Manual