Avsl 952.010UK Kullanıcı Kılavuzu - Sayfa 3

Konuşmacılar Avsl 952.010UK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avsl 952.010UK 4 sayfaları. Rechargeable megaphone

Rear control panel

Setting up

To operate the RM10 megaphone, it will be necessary to insert the supplied Lithium-ion cell into the rear

battery compartment and make sure it is charged firstly.

Before inserting the battery, set both the TALK and SIREN buttons (3, 7) to the "out" position.

To access the rear battery compartment, press the battery compartment release button (5) and the rear

section of the megaphone will flip upwards to reveal the battery holder.

Load in the 18650 Lithium-ion cell negative (-) end first, leaving the positive (+) button facing outward.

Fold down the rear section to cover the battery compartment until it clicks firmly shut.

Connect the supplied USB to DC plug lead to a USB port or charger that has a current capacity of 500mA

or more and connect the DC plug end to the 5V power inlet on the RM10 rear panel (2).

The CHG indicator (5) will light to show that charging is in progress.

When the battery is full, the FULL indicator (6) will light to confirm this.

Power ON LED indicator

5Vdc power inlet

TALK button (power on/off)

Microphone

CHG (charging) LED indicator

FULL (charged) LED indicator

SIREN on/off button

VOLUME control

Battery compartment release button

952.010UK User Manual