CPR Call Blocker 사용자 설명서 - 페이지 4
{카테고리_이름} CPR Call Blocker에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CPR Call Blocker 13 페이지. All-in-one call blocker
CPR Call Blocker에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)
페이지 인쇄
S E T T I N G U P
C P R C A L L B L O C K E R
Step 1
Step 1
Remove the line cable from your telephone and plug into the LINE 2 port of the Call
Remove the line cable from your telephone and plug into the LINE 2 port of the Call
Blocker.
Blocker.
Step 2
Step 2
Use the short black cable provided to connect one end to the TEL 2 port of the Call
Use the short black cable provided to connect one end to the TEL 2 port of the Call
Blocker and the other end back to your telephone.
Blocker and the other end back to your telephone.
Step 3
Step 3
Make sure that all cables are connected securely and then check for a dial tone. If the
Make sure that all cables are connected securely and then check for a dial tone. If the
red lights display on top of the unit when checking for a dial tone or making an
red lights display on top of the unit when checking for a dial tone or making an
outgoing call then this will confirm that the call blocker is setup correctly.
outgoing call then this will confirm that the call blocker is setup correctly.
Disconnect the line cable
from your telephone and
02.
plug into the LINE 2 port of
the Call Blocker.
2