CPS AR2700A 운영 매뉴얼 - 페이지 7
{카테고리_이름} CPS AR2700A에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CPS AR2700A 17 페이지. Refrigerant recovery / recycling system
페이지 인쇄Installing Filter Bracket, Filter Drier Associated Hoses
Secure filter bracket to tank collar
with the use of the provided nylon ties
4
5
1
3
2
Install Universal Filter / Tank bracket onto top of
tank. Use the provided wire ties to hold the Universal
Filter / Tank bracket to the collar of the tank. Install
filter drier onto Universal Filter / Tank bracket. Use
touch fasteners
the Universal Filter / Tank bracket.
The unit has three hoses that need to be installed:
Blue Hose with Ball Valve, Red Hose with Ball valve,
and short red hose. Connect both the Blue and Red
hoses with Ball Valves to the back of the AR2700 as
shown in the picture. Connect the other end of the
Blue Hose to the Tank Vapor Port. Connect the other
end of the Red Hose with ball valve to the Filter Drier
7
outlet port. Install the Short Red hose from the Tank
Liquid Port to the Filter Drier Inlet port as shown in
6
the picture. Use a 9/16" wrench to tighten this
fittings. Open all Tank and Hose valves.
Check for leaks.
Unit Guide:
1. Blue hose with BV
2. Red hose with BV
3. Tank vapor valve
4. Filter outlet
Check vacuum pump oil level. Add oil if necessary.
Slide vacuum pump out on its tray for easier access.
Check tool drawer for accessories such as tank refill
adaptors and low side charging adatpor.
Proceed to Tank Refill Function on page 10. It will be
necessary to fill the refrigerant storage tank before
charging operation can take place.
7
UNIT PREPARATION
straps to secure the filter drier to
5. Tank liquid valve
6. Short red hose
7. Filter inlet