Avtech AVT420A 사용자 설명서 - 페이지 3

{카테고리_이름} Avtech AVT420A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech AVT420A 6 페이지. Hd cctv total solution
Avtech AVT420A에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

페이지 인쇄

INSTALLATION

Step1: Separate the dome cover from the camera.

Step2: Make sure the screw holes on the plate are aligned with the holes on the camera base.

If not, slightly loosen the two screws on the plate and rotate it.

Step3: Mark the locations of two screw holes on the ceiling or wall for installing the camera later.

NOTE: An installation sticker could be downloaded from

www.surveillance-download.com/user/503_installation_sticker.pdf.

-- For cabling behind the ceiling or wall, mark the location for one more hole for the camera cable to go through;

-- For cabling along the ceiling or wall, do as indicated below for the cable to go through.

Step4: Fix the camera to the ceiling or wall with the supplied screws.

Step5: Connect your camera to power.

Step 6: Pan, tilt and rotate the lens itself to adjust the position and viewing angle of the camera, and fasten the two

screws on the plate to fix.

Step 7: Replace the dome cover back to the camera.

NOTE: Please wipe the inner part of the dome cover against the lens for clear images.