Avtech AVT420A Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Avtech AVT420A. Avtech AVT420A 6 страниц. Hd cctv total solution
Также для Avtech AVT420A: Руководство пользователя (8 страниц)

Печатать страницу

INSTALLATION

Step1: Separate the dome cover from the camera.

Step2: Make sure the screw holes on the plate are aligned with the holes on the camera base.

If not, slightly loosen the two screws on the plate and rotate it.

Step3: Mark the locations of two screw holes on the ceiling or wall for installing the camera later.

NOTE: An installation sticker could be downloaded from

www.surveillance-download.com/user/503_installation_sticker.pdf.

-- For cabling behind the ceiling or wall, mark the location for one more hole for the camera cable to go through;

-- For cabling along the ceiling or wall, do as indicated below for the cable to go through.

Step4: Fix the camera to the ceiling or wall with the supplied screws.

Step5: Connect your camera to power.

Step 6: Pan, tilt and rotate the lens itself to adjust the position and viewing angle of the camera, and fasten the two

screws on the plate to fix.

Step 7: Replace the dome cover back to the camera.

NOTE: Please wipe the inner part of the dome cover against the lens for clear images.