Avtech AVT543 사용자 설명서 - 페이지 5

{카테고리_이름} Avtech AVT543에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech AVT543 8 페이지.

Step 5: Adjust the viewing angle of the camera.

To adjust the angle vertically, remove the black shield as indicated in

on both sides to loosen the tile mechanism and move the lens. Then, secure the tilt mechanism by

fasten the knobs to fix the angle.

Step6: Replace the desiccants with the two packs of desiccants supplied in the sales package, and replace

the black shield back.

NOTE: It's recommended to unpack the desiccants at this step, and finish the whole installation

within 2 minutes in case the desiccants absorb too much moisture.

Step7: Find the mark as indicated below on both the dome cover and the camera base. Align these two

marks to replace the dome cover back to the camera.

NOTE: Please wipe the inner part of the dome cover against the lens for clear images.

Figure 6

desiccants

Figure 7

Figure 5

Rotate

, and rotate the knobs

Figure 6

Mark to align

Figure 8