ページを印刷する
Step 5: Adjust the viewing angle of the camera.
To adjust the angle vertically, remove the black shield as indicated in
on both sides to loosen the tile mechanism and move the lens. Then, secure the tilt mechanism by
fasten the knobs to fix the angle.
Step6: Replace the desiccants with the two packs of desiccants supplied in the sales package, and replace
the black shield back.
NOTE: It's recommended to unpack the desiccants at this step, and finish the whole installation
within 2 minutes in case the desiccants absorb too much moisture.
Step7: Find the mark as indicated below on both the dome cover and the camera base. Align these two
marks to replace the dome cover back to the camera.
NOTE: Please wipe the inner part of the dome cover against the lens for clear images.
Figure 6
desiccants
desiccants
Figure 7
Figure 5
Rotate
, and rotate the knobs
Figure 6
Mark to align
Figure 8