Dell 1555 - Studio - Chainlink 서비스 매뉴얼 - 페이지 14

{카테고리_이름} Dell 1555 - Studio - Chainlink에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 1555 - Studio - Chainlink 50 페이지.
Dell 1555 - Studio - Chainlink에 대해서도 마찬가지입니다: 서비스 매뉴얼 (50 페이지)

페이지 인쇄

1. Removing the Power Button Board

NOTE:

The original thermal pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is

replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.

NOTE:

This procedure assumes that you have already removed the processor heat sink and are ready to replace it.

1. Align the four captive screws on the processor thermal-cooling assembly processor cover with the screw holes on the system board and tighten the

screws in sequential order.

2. Replace the system board to the computer base.

3. Replace the six screws that secure the system board to the computer base.

4. Connect the AC adapter connector cable, USB cable, fan cable, and the subwoofer cable to the system board (see

Assembly).

5. Connect the ExpressCard cables back to their respective connectors on the system board (see

6. Replace the optical drive (see

7. Slide the battery into the bay until it clicks into place.

Back to Contents Page

Replacing the Optical

Drive).

Replacing the System Board

Replacing the ExpressCard

Board).