Dell 1555 - Studio - Chainlink 서비스 매뉴얼 - 페이지 26
{카테고리_이름} Dell 1555 - Studio - Chainlink에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 1555 - Studio - Chainlink 50 페이지.
Dell 1555 - Studio - Chainlink에 대해서도 마찬가지입니다: 서비스 매뉴얼 (50 페이지)
페이지 인쇄
Back to Contents Page
Keyboard
Dell Studio™ 1555 Service Manual
Removing the Keyboard
Replacing the Keyboard
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
inside the computer.
Removing the Keyboard
1. Follow the procedures in
Before You
2. Remove the center control cover (see
3. Remove the two screws at the top of the keyboard.
CAUTION:
The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
4. Lift the keyboard and hold it to access the keyboard connector.
5. Disconnect the keyboard cable from the keyboard connector on the system board by rotating the keyboard connector latch towards the front of the
computer.
6. Slide the keyboard cable out of the keyboard connector.
NOTE:
If you have the backlit keyboard (optional), there would be an additional cable that needs to be disconnected.
1
screws (2)
3
securing tab
Replacing the Keyboard
1. Follow the procedures in
Before You
Begin.
Removing the Center Control
2
keyboard tabs
4
keyboard cable
Begin.
Before Working Inside Your
Cover).
Computer) before working