Dell 5530 Mono Laser 서비스 매뉴얼 - 페이지 44
{카테고리_이름} Dell 5530 Mono Laser에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5530 Mono Laser 46 페이지. Loading paper and specialty media
Dell 5530 Mono Laser에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 설정 및 사양 매뉴얼 (29 페이지), 설정 및 사양 (29 페이지)
페이지 인쇄
Enhanced Pre-Boot System Assessment — ePSA
diagnostics
The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the
BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device
groups allowing you to:
•
Run tests automatically or in an interactive mode
•
Repeat tests
•
Display or save test results
•
Run thorough tests to introduce additional test options to provide extra information about the failed device(s)
•
View status messages that inform you if tests are completed successfully
•
View error messages that inform you of problems encountered during testing
CAUTION:
Use the system diagnostics to test only your computer. Using this program with other computers may cause invalid
results or error messages.
NOTE:
Some tests for specific devices require user interaction. Always ensure that you are present at the computer terminal
when the diagnostic tests are performed.
Running the ePSA Diagnostics
1
Invoke diagnostics boot by either of the methods suggested above
2
Once on one time boot menu use up/down arrow key to navigate to ePSA or diagnostics and press <return> key to launch
Fn+PWR will flash diagnostics boot selected on screen and launch ePSA/diagnostics directly.
3
On the boot menu screen, select the Diagnostics option.
4
Press the arrow in the lower-right corner to go to the page listing.
The items detected are listed and will be tested
5
If there are any issues, error codes are displayed.
Note the error code and validation number and contact Dell.
To run a diagnostic test on a specific device
1
Press Esc and click Yes to stop the diagnostic test.
2
Select the device from the left pane and click Run Tests.
3
If there are any issues, error codes are displayed.
Note the error code and validation number and contact Dell.
44
Troubleshooting
Troubleshooting
4