Dell Inspiron 5491 설정 및 사양 매뉴얼 - 페이지 24
{카테고리_이름} Dell Inspiron 5491에 대한 설정 및 사양 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 5491 33 페이지. Solid state drive
Dell Inspiron 5491에 대해서도 마찬가지입니다: 설정 및 사양 매뉴얼 (37 페이지), 설정 및 사양 (20 페이지), 설치 매뉴얼 (15 페이지)
페이지 인쇄
Option
Description
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password,
when they are set. The options are:
● Disabled
● Reboot bypass
Default setting: Disabled
Password
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
Change
password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup
Allows you to determine whether changes to the setup options are allowed when an Administrator
Changes
Password is set. If disabled the setup options are locked by the admin password. The option "Allow
Wireless Switch changes" is disabled by default
UEFI Capsule
Allows yout to control whether this system allows BIOS updates via UEFI capsule update packages.
Firmware
● Enable UEFI Capsule Firmware Updates (enabled by default)
Updates
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
● TPM On: This option is enabled by default.
● Clear
● PPI Bypass for Enabled Commands
● Attestation Enable (This option is enabled by default)
● Key Storage Enable (This option is enabled by default)
● PPI Bypass for Disable Commands
● PPI Bypass for Clear Commands (This option is enabled by default)
● SHA-256: This option is enabled by default.
● Disabled
● Enabled (This option is enabled by default)
Computrace
Allows you to activate or disable the optional Computrace software The options are:
● Deactivate
● Disable
● Activate
CPU XD Support
Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)
OROM Keyboard
Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot.
Access
The options are:
● Enabled
● One Time Enable
● Disabled
Default setting: Enabled
Admin Setup
Allows you to prevent users from entering Setup when an Administrator password is set.
Lockout
Default Setting: Disabled
Master Password
Allows you to disable master password support. Hard disk password need to be cleared before the setting
Lockout
can be changed
● Enable Master Password Lockout
Default setting: Disabled
SMM Security
The option SMM Security Mitigation is not selected by default
Mitigation
24
System setup options
NOTE:
To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).
NOTE:
The Activate and Disable options will permanently activate or disable the feature and no
further changes will be allowed