Dell Inspiron 5491 설정 및 사양 매뉴얼 - 페이지 26

{카테고리_이름} Dell Inspiron 5491에 대한 설정 및 사양 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 5491 33 페이지. Solid state drive
Dell Inspiron 5491에 대해서도 마찬가지입니다: 설정 및 사양 매뉴얼 (37 페이지), 설정 및 사양 (20 페이지), 설치 매뉴얼 (15 페이지)

페이지 인쇄
Dell Inspiron 5491 설정 및 사양 매뉴얼
Option
Description
C-States Control Allows you to enable or disable the additional processor sleep states.
● C states
Default setting: The option is enabled.
Intel TurboBoost
Allows you to enable or disable the Intel TurboBoost mode of the processor.
● Enable Intel TurboBoost
Default setting: The option is enabled.
Hyper-Thread
Allows you to enable or disable the Hyper-Threading in the processor.
Control
● Disabled
● Enabled
Default setting: Enabled.

Power Management screen options

Option
Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Default setting: Wake on AC is not selected.
Enable Intel
the option Enable Intel Speed Shift Technology option is enabled by default.
Speed Shift
Technology
Auto On Time
Allows you to set the time at which the computer must turn on automatically. The options are:
● Disabled
● Every Day
● Weekdays
● Select Days
Default setting: Disabled
USB Wake
Allows you to enable USB devices to wake the system from Standby.
Support
● Enable USB Wake Support
● Wake on Dell USB-C Dock: This option is enabled by default.
Wireless Radio
Allows you to enable or disable the feature that automatically switches from wired or wireless networks
Control
without depending on the physical connection.
● Control WLAN Radio
● Control WWAN Radio
Default setting: The options are disabled.
Wake on LAN/
Allows you to enable or disable the feature that powers on the computer from the Off state when
WLAN
triggered by a LAN signal.
● Disabled
● LAN Only
● WLAN Only
● LAN or WLAN
Default setting: Disabled
Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
26
System setup options
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.