Dell Inspiron 600m 서비스 매뉴얼 - 페이지 10

{카테고리_이름} Dell Inspiron 600m에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 600m 40 페이지. Hard drive
Dell Inspiron 600m에 대해서도 마찬가지입니다: 여기에서 시작 (2 페이지), 여기에서 시작 (2 페이지), 여기에서 시작 (2 페이지), 시작하기 매뉴얼 (2 페이지), 사용자 설명서 (34 페이지), 설정 매뉴얼 (2 페이지), 시작하기 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 서비스 매뉴얼 (41 페이지), 미디어 베이스 사용 설명서 (26 페이지), 서비스 매뉴얼 (41 페이지), 설치 및 구성 (38 페이지), 빠른 시작 (2 페이지), 빠른 시작 (2 페이지), 빠른 시작 (2 페이지), 컴퓨터 설정 (2 페이지), 서비스 매뉴얼 (41 페이지), 서비스 매뉴얼 (4 페이지)

Dell Inspiron 600m 서비스 매뉴얼
 
3. Place the hinge cover over the front display latches and rotate the cover down into place.
 
4. Ensure that the two securing tabs on the outer edge of hinge cover are engaged in their respective slots
NOTE:
Make sure that the main cable and the speaker cables are tucked away from the hinge before you reattach the hinge cover.
 
5. Slide the hinge caps over the display hinges and press down to snap the hinge caps into place.
 
6. Close the display.
 Removing the Display Module
 
1. Remove the battery.
 
2. Remove the keyboard.
 
3. Disconnect the black and white antenna cables from the Mini PCI Card.
NOTE:
You must detach the antenna cables from the Mini PCI Card before you remove the display module.
 
4. Loosen the two M2 x 2mm captive screws and remove the upper memory module cover.
 
5. Turn the computer over, and remove the two M2.5 x 6-mm screws from the bottom of the computer.
1 M2.5 x 6-mm screws (2)
 
6. Remove the two M2.5x 6-mm screws from the back of the computer.
1 M2.5 x 6-mm screws (2)
 
7. Turn the computer over and open the display 180 degrees.
 
8. Disconnect the speaker cable connector.
 
9. Gently pull on the display cable tab and disconnect the display cable on the left side of the unit.
 
10. Disconnect the display cable on the right side of the unit.
NOTE:
Make sure that the antenna cables are disconnected from the Mini PCI Card before removing the display module.
 
11. Disconnect the antenna cables and make note of the path.