Dell Inspiron M5030 서비스 매뉴얼 - 페이지 26

{카테고리_이름} Dell Inspiron M5030에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron M5030 42 페이지. Service guide
Dell Inspiron M5030에 대해서도 마찬가지입니다: 서비스 매뉴얼 (42 페이지)

페이지 인쇄
Dell Inspiron M5030 서비스 매뉴얼
Back to Contents Page
  Memory Module(s)
Dell™ Inspiron™ N5020/M5030/N5030 Service Manual 
  Removing the Memory Module(s)
  Replacing the Memory Module(s)
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
is not covered by your warranty.
 
CAUTION:
surface (such as a connector on your computer).
 
CAUTION:
computer.
You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Setup Guide for information on the
type of memory supported by your computer.
NOTE:
Memory modules purchased from Dell™ are covered under your computer warranty.
Your computer has two user-accessible SODIMM connectors.
 Removing the Memory Module(s)
 
1. Follow the instructions in
 
2. Remove the battery (see
 
3. Remove the keyboard (see
 
CAUTION:
 
4. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.
 
5. Remove the memory module from the memory-module connector.
1
memory-module connector
3
memory module
 Replacing the Memory Module(s)
 
CAUTION:
install a memory module in the connector labeled "DIMM B."
 
1. Follow the instructions in
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
Removing the
Keyboard).
To prevent damage to the memory-module connector, do not use tools to spread the memory module securing clips.
2
securing clips (2)
If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you
Before You
Begin.
UserManuals.info
Removing the
Battery) before working inside the