Dell Inspiron M5030 Service Manual - Page 26
Browse online or download pdf Service Manual for Laptop Dell Inspiron M5030. Dell Inspiron M5030 42 pages. Service guide
Also for Dell Inspiron M5030: Service Manual (42 pages)
Back to Contents Page
Memory Module(s)
Dell™ Inspiron™ N5020/M5030/N5030 Service Manual
Removing the Memory Module(s)
Replacing the Memory Module(s)
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Setup Guide for information on the
type of memory supported by your computer.
NOTE:
Memory modules purchased from Dell™ are covered under your computer warranty.
Your computer has two user-accessible SODIMM connectors.
Removing the Memory Module(s)
1. Follow the instructions in
2. Remove the battery (see
3. Remove the keyboard (see
CAUTION:
4. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.
5. Remove the memory module from the memory-module connector.
1
memory-module connector
3
memory module
Replacing the Memory Module(s)
CAUTION:
install a memory module in the connector labeled "DIMM B."
1. Follow the instructions in
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
Removing the
Keyboard).
To prevent damage to the memory-module connector, do not use tools to spread the memory module securing clips.
2
securing clips (2)
If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you
Before You
Begin.
UserManuals.info
Removing the
Battery) before working inside the