Avtech AVC467A 사용자 설명서 - 페이지 11
{카테고리_이름} Avtech AVC467A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech AVC467A 18 페이지.
페이지 인쇄INSTALLATION
1. Use the supplied three screws to attach the bracket to wall. Drill a hole in
advance on the proper position of the wall for the Power and Video Cable to
pass through later.
2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then,
screw the Joint Lock to the backside of the camera (turn clockwise).
NOTE: There are two screw holes on the backside of the camera. Please
choose the proper one which best suits your installation
environment.
3. Screw the camera with the Joint Lock connected to the bracket. After that,
secure the Joint Lock to fix. Then, pass the Power and Video Cable through the
hole drilled in Step 1 to hide it.
INSTALLATION
1. Use the supplied three screws to attach the bracket to wall. Drill a hole in
advance on the proper position of the wall for the Power and Video Cable to
pass through later.
2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then,
screw the Joint Lock to the backside of the camera (turn clockwise).
NOTE: There are two screw holes on the backside of the camera. Please
choose the proper one which best suits your installation
environment.
3. Screw the camera with the Joint Lock connected to the bracket. After that,
secure the Joint Lock to fix. Then, pass the Power and Video Cable through the
hole drilled in Step 1 to hide it.
alarm shop
5
4