Avtech AVC467A Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для IP-камера Avtech AVC467A. Avtech AVC467A 18 сторінок.

Друкувати сторінку

INSTALLATION

1. Use the supplied three screws to attach the bracket to wall. Drill a hole in
advance on the proper position of the wall for the Power and Video Cable to
pass through later.
2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then,
screw the Joint Lock to the backside of the camera (turn clockwise).
NOTE: There are two screw holes on the backside of the camera. Please
choose the proper one which best suits your installation
environment.
3. Screw the camera with the Joint Lock connected to the bracket. After that,
secure the Joint Lock to fix. Then, pass the Power and Video Cable through the
hole drilled in Step 1 to hide it.
INSTALLATION
1. Use the supplied three screws to attach the bracket to wall. Drill a hole in
advance on the proper position of the wall for the Power and Video Cable to
pass through later.
2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then,
screw the Joint Lock to the backside of the camera (turn clockwise).
NOTE: There are two screw holes on the backside of the camera. Please
choose the proper one which best suits your installation
environment.
3. Screw the camera with the Joint Lock connected to the bracket. After that,
secure the Joint Lock to fix. Then, pass the Power and Video Cable through the
hole drilled in Step 1 to hide it.
alarm shop
5
4