Avtech RMA-DAP-SEN 설치 참고 사항 - 페이지 4

{카테고리_이름} Avtech RMA-DAP-SEN에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech RMA-DAP-SEN 5 페이지. Digital active power sensor

Configure Your Digital Active Power Sensor

Use Room Alert's Built-In Web Interface

Your Room Alert must be on at least the minimum firmware version below to be

compatible with the Digital Active Power Sensor. You may download the latest firmware

from your account at RoomAlert.com.

•

Room Alert 32S

•

Room Alert 12S

•

Room Alert 32E

•

Room Alert 12E

•

Room Alert 4E

•

Room Alert 3E

•

Room Alert 3 Wi-Fi

Once your Room Alert is on at least the minimum firmware version, navigate to

Sensors



model.

1. Scroll to your external digital sensor(s), the total number of which will vary depending

on the Room Alert model.

2. Find the digital sensor interface that matches the port you connected your Digital

Active Power Sensor to. For example, if you used the first digital port on your Room

Alert, look for Sensor 1 Alarm Configuration; if you used the second, look for Sensor 2

Alarm Configuration, and so on.

3. Notice that your Room Alert automatically detects the digital sensor and inserts a drop-

down list in Sensor Type, which defaults to Temp/Humidity. Select

Power

AVTECH Software, Inc.

v1.0.0

v1.2.0

v3.1.0

v4.1.0

v2.1.0

v2.0.0

in its web interface. The options you see below will vary depending on the

to bring up the interface for your Digital Active Power Sensor.

Page 4

Settings

Temp/Active

AVTECH.com