Avtech RMA-DAP-SEN Вказівки щодо встановлення - Сторінка 4

Переглянути онлайн або завантажити pdf Вказівки щодо встановлення для Аксесуари Avtech RMA-DAP-SEN. Avtech RMA-DAP-SEN 5 сторінок. Digital active power sensor

Avtech RMA-DAP-SEN Вказівки щодо встановлення
Configure Your Digital Active Power Sensor
Configure Your Digital Active Power Sensor
Use Room Alert's Built-In Web Interface
Your Room Alert must be on at least the minimum firmware version below to be
compatible with the Digital Active Power Sensor. You may download the latest firmware
from your account at RoomAlert.com.
Room Alert 32S
Room Alert 12S
Room Alert 32E
Room Alert 12E
Room Alert 4E
Room Alert 3E
Room Alert 3 Wi-Fi
Once your Room Alert is on at least the minimum firmware version, navigate to
Sensors
model.
1. Scroll to your external digital sensor(s), the total number of which will vary depending
on the Room Alert model.
2. Find the digital sensor interface that matches the port you connected your Digital
Active Power Sensor to. For example, if you used the first digital port on your Room
Alert, look for Sensor 1 Alarm Configuration; if you used the second, look for Sensor 2
Alarm Configuration, and so on.
3. Notice that your Room Alert automatically detects the digital sensor and inserts a drop-
down list in Sensor Type, which defaults to Temp/Humidity. Select
Power
AVTECH Software, Inc.
v1.0.0
v1.2.0
v3.1.0
v3.1.0
v4.1.0
v2.1.0
v2.0.0
in its web interface. The options you see below will vary depending on the
to bring up the interface for your Digital Active Power Sensor.
Page 4
Settings
Temp/Active
AVTECH.com