DGTech d-briDGe 빠른 시작 매뉴얼
{카테고리_이름} DGTech d-briDGe에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DGTech d-briDGe 2 페이지.
페이지 인쇄1
5
Instructions:
1
Install J2534 compliant PC drivers from the d-briDGe CD.
After rebooting, you will be prompted to check for updates. Connect to the Internet and press "Continue", then press the "Check for
2
Updates" button. If there are updates (Red), press the "Download" button. DG Update will download and start the installation.
Using the USB cable, connect the d-briDGe to your PC. Connect the vehicle cable to the d-briDGe.
3
Make certain to first connect the vehicle cable to the d-briDGe as stated in 3 above.
4
Finally, connect the other end of the vehicle cable to the vehicle's diagnostic port.
Configure your J2534 compliant diagnostic application to use the d-briDGe. The "d-briDGe User Manual" contains information for
5
configuring many of the "common" applications. If your application is not covered in the manual, consult the documentation that
came with your application on how to configure for J2534 compliant devices.
33604 West Eight Mile Road Farmington Hills, MI 48335
d-briDGe Quickstart Guide
3
|
248.888.2000
2
3
|
www.dgtech.com
|
4
|
store.dgtech.com