DGTech d-briDGe Hızlı Başlangıç Kılavuzları

Adaptör DGTech d-briDGe için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzları indirin. DGTech d-briDGe 2 sayfaları.

Instructions:

Install J2534 compliant PC drivers from the d-briDGe CD.

After rebooting, you will be prompted to check for updates. Connect to the Internet and press "Continue", then press the "Check for

Updates" button. If there are updates (Red), press the "Download" button. DG Update will download and start the installation.

Using the USB cable, connect the d-briDGe to your PC. Connect the vehicle cable to the d-briDGe.

Make certain to ﬁrst connect the vehicle cable to the d-briDGe as stated in 3 above.

Finally, connect the other end of the vehicle cable to the vehicle's diagnostic port.

Conﬁgure your J2534 compliant diagnostic application to use the d-briDGe. The "d-briDGe User Manual" contains information for

conﬁguring many of the "common" applications. If your application is not covered in the manual, consult the documentation that

came with your application on how to conﬁgure for J2534 compliant devices.

33604 West Eight Mile Road Farmington Hills, MI 48335

d-briDGe Quickstart Guide

248.888.2000

www.dgtech.com

store.dgtech.com