ABB 2TLA020009R2500 원본 사용 설명서 - 페이지 6

{카테고리_이름} ABB 2TLA020009R2500에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB 2TLA020009R2500 20 페이지. Safety light beam

Function description

The Spot light beam is supervised by the Vital 1 safety module. A unique coded signal is sent out from the control

unit to the transmitter (Spot T). The signal which comes back from the receiver (Spot R) is then compared in the

Vital 1 safety module. If the correct coded signal is received the Vital 1 switches the necessary safety output

contacts to permit dangerous machine movements.

Coding guarantees that no output signals can be produced by light from other sources, interference, or faults in

components in the transmitter or receiver. The light beam is dynamically supervised which means that if the signal

stops pulsating at the correct frequency it is immediately detected. By means of coding, the dynamic signal can

pass between up to 6 pairs of transmitters and receivers, with only one pair needing to be electrically connected to

a Vital 1.

Receiver 1

Spot R

2TLC172178M0201, rev. D

2011-11-15

Transmitter 1

Spot T

10 m

35 m

Coded pulse transmission

Coded pulse

transmission

Vital 1 safety module

can accommodate up

to 6 Spot systems

Transmitter 2

Spot T

10 m

35 m

24 VDC

This supply does not need

to be the same as

connected to the Vital 1

Coded pulse transmission

Receiver 2

Spot R