Dell Precision Workstation 350 설치 매뉴얼 - 페이지 25

{카테고리_이름} Dell Precision Workstation 350에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Precision Workstation 350 32 페이지. Dell poweredge 350 servers: supplementary guide
Dell Precision Workstation 350에 대해서도 마찬가지입니다: 정보 업데이트 (30 페이지)

페이지 인쇄
Dell Precision Workstation 350 설치 매뉴얼
support.dell.com
To install the slide assemblies in the rack, perform the following steps:
1.
Place the front of the template on the vertical rails at the front of the rack where
you want to install the system.
2.
Ensure that the printing on the template identifies the side facing outwards as
the template front.
3.
Position the bottom of the template in line with the desired bottom position of
the system chassis.
4.
Mark the rack's front vertical rails with a felt-tipped marker or place masking tape
where the system's upper and lower edges will be located (see Figure 1-16).
5.
Make a mark or place tape on the vertical rails next to the template's V-shaped
notches.
1 U (1.75 inches) between
slide assemblies
(drawing is not to scale)
1-U template

Figure 1-16. Using Template to Mark Vertical Rails

Rack Installation Guide
1-19