Dell Studio XPS 1340 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Dell Studio XPS 1340에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Studio XPS 1340 40 페이지.

3. Tighten the four captive screws that secure the central processor heat sink to the system board.

4. Replace the rear caps (see

5. Replace the base cover (see

6. Slide the battery into the battery bay until it clicks into place.

Graphic Processor Heat Sink/Thermal Fan

Removing the Graphic Processor Heat Sink/Thermal Fan

NOTE:

The graphic processor heat sink availability may depend on your system configuration.

NOTE:

The removal procedure for the thermal fan may differ according to your system configuration.

1. Follow the instructions in

Before You

2. Remove the base cover (see

3. Remove the rear caps (see

4. Remove the central processor heat sink (see

5. Loosen the two captive screws and remove the other two screws that secure the graphic processor heat sink/thermal fan to the system board.

6. Disconnect the thermal fan cable from the system board connector.

fan cable

thermal fan

captive screws (2)

7. Lift the graphic processor heat sink/thermal fan off the computer.

Replacing the Graphic Processor Heat Sink/Thermal Fan

NOTE:

This procedure assumes that you have already removed the graphic processor heat sink/thermal fan and are ready to replace it.

1. Place the new thermal cooling pad on the graphic processor heat sink/thermal fan.

NOTE:

If the graphic processor heat sink is replaced, the thermal cooling pad will be attached to the new graphic processor heat sink. Use the thermal

cooling pad provided in the kit on the central processor heat sink and graphic processor heat sink.

2. Place the graphic processor heat sink/thermal fan on the system board.

Replacing the Rear

Caps).

Replacing the Base

Cover).

Begin.

Removing the Base

Cover).

Removing the Rear

Caps).

Removing the Central Processor Heat

graphic processor heat sink

screws (2)

Sink).