Dell Studio XPS 1340 Servis Kılavuzu - Sayfa 13
Dizüstü Bilgisayar Dell Studio XPS 1340 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Studio XPS 1340 40 sayfaları.
Sayfayı Yazdır3. Tighten the four captive screws that secure the central processor heat sink to the system board.
4. Replace the rear caps (see
5. Replace the base cover (see
6. Slide the battery into the battery bay until it clicks into place.
Graphic Processor Heat Sink/Thermal Fan
Removing the Graphic Processor Heat Sink/Thermal Fan
NOTE:
The graphic processor heat sink availability may depend on your system configuration.
NOTE:
The removal procedure for the thermal fan may differ according to your system configuration.
1. Follow the instructions in
Before You
2. Remove the base cover (see
3. Remove the rear caps (see
4. Remove the central processor heat sink (see
5. Loosen the two captive screws and remove the other two screws that secure the graphic processor heat sink/thermal fan to the system board.
6. Disconnect the thermal fan cable from the system board connector.
1
fan cable
2
3
thermal fan
4
5
captive screws (2)
7. Lift the graphic processor heat sink/thermal fan off the computer.
Replacing the Graphic Processor Heat Sink/Thermal Fan
NOTE:
This procedure assumes that you have already removed the graphic processor heat sink/thermal fan and are ready to replace it.
1. Place the new thermal cooling pad on the graphic processor heat sink/thermal fan.
NOTE:
If the graphic processor heat sink is replaced, the thermal cooling pad will be attached to the new graphic processor heat sink. Use the thermal
cooling pad provided in the kit on the central processor heat sink and graphic processor heat sink.
2. Place the graphic processor heat sink/thermal fan on the system board.
Replacing the Rear
Caps).
Replacing the Base
Cover).
Begin.
Removing the Base
Cover).
Removing the Rear
Caps).
Removing the Central Processor Heat
graphic processor heat sink
screws (2)
Sink).