Dell Vostro 420 업그레이드 매뉴얼 - 페이지 10

{카테고리_이름} Dell Vostro 420에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Vostro 420 42 페이지. System memory upgrade
Dell Vostro 420에 대해서도 마찬가지입니다: 설정 및 기능 정보 (10 페이지)

페이지 인쇄

1-6

System Memory Upgrade

Close the computer cover, reconnect the computer and peripherals to their

power sources, and turn them on.

As the system boots, it detects the presence of the new RIMMs and

automatically changes the system configuration information in system setup.

NOTES: Adding or removing RIMMs causes the following message to be

displayed at the next system start-up:

7KH DPRXQW RI V\VWHP PHPRU\ KDV FKDQJHG

After you replace the cover, if the chassis intrusion option is set to Enabled, the

chassis intrusion detector causes the following message to be displayed at the

next system start-up:

$/(57

&RYHU ZDV SUHYLRXVO\ UHPRYHG

Enter system setup. When Setup appears in the upper-right corner of the

screen, press <F2>.

If you wait too long and the operating system begins to load into memory, allow

the system to complete the load operation; shut down the system and try again.

NOTE: For instructions on using system setup, see the User's Guide.

10. Reset the Chassis Intrusion option:

Press the down-arrow key to move to the System Security option.

Press <Enter> to access the System Security option's pop-up menu.

Press the down-arrow key to move to the Chassis Intrusion option.

Press the left- or right-arrow key to select Reset.

Choose Enabled, Enabled-Silent, or Disabled.

NOTES: The chassis intrusion default is Enabled.

If a setup password has been assigned by someone else, contact the network

administrator for information on resetting the chassis intrusion detector.

See the system User's Guide for information on the chassis intrusion detector.

11. When the memory total is correct, press <Esc> to exit system setup.

If the memory total is incorrect, repeat steps 2 through 4. Check the installed

modules to ensure that they are seated properly in their sockets. Then repeat

steps 5 through 10.

If the memory total is still incorrect, contact Dell for technical support.

See "Getting Help" in the User's Guide.