Dell Vostro 420 업그레이드 매뉴얼 - 페이지 11

{카테고리_이름} Dell Vostro 420에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Vostro 420 42 페이지. System memory upgrade
Dell Vostro 420에 대해서도 마찬가지입니다: 설정 및 기능 정보 (10 페이지)

페이지 인쇄

support.dell.com

12. Run the Dell Diagnostics to verify that the memory modules are operating

properly.

NOTE: For information on troubleshooting and running the Dell Diagnostics, see

"Troubleshooting" in the User's Guide.

Installing a RIMM

NOTICE: Before you upgrade RIMMs, you must upgrade the BIOS. See

"Upgrading the BIOS" on page 1-1 for instructions.

If a RIMM is already installed in the socket you want to use, you must remove it.

For instructions, see "Removing a RIMM" on page 1-8.

To install a RIMM, perform the following steps (see Figure 1-2).

Locate the plastic securing clips at each end of the socket. Press the clips out-

ward until they snap open.

NOTICE: To avoid damage to the memory module, press the module

straight down into the socket with equal force applied at each end of the

module.

NOTICE: Ensure that the notches on the RIMM are inserted into the correct

side of the socket.

Press the RIMM straight into the socket until the securing tabs snap into place

around the ends of the RIMM.

notches (2)

securing

clips (2)

Figure 1-2. Installing a RIMM

System Memory Upgrade

1-7