Dell Vostro 420 Руководство по обновлению - Страница 11
Просмотреть онлайн или скачать pdf Руководство по обновлению для Ноутбук Dell Vostro 420. Dell Vostro 420 42 страницы. System memory upgrade
Также для Dell Vostro 420: Информация о настройках и возможностях (10 страниц)
Печатать страницуsupport.dell.com
12. Run the Dell Diagnostics to verify that the memory modules are operating
properly.
NOTE: For information on troubleshooting and running the Dell Diagnostics, see
"Troubleshooting" in the User's Guide.
Installing a RIMM
NOTICE: Before you upgrade RIMMs, you must upgrade the BIOS. See
"Upgrading the BIOS" on page 1-1 for instructions.
If a RIMM is already installed in the socket you want to use, you must remove it.
For instructions, see "Removing a RIMM" on page 1-8.
To install a RIMM, perform the following steps (see Figure 1-2).
1.
Locate the plastic securing clips at each end of the socket. Press the clips out-
ward until they snap open.
NOTICE: To avoid damage to the memory module, press the module
straight down into the socket with equal force applied at each end of the
module.
NOTICE: Ensure that the notches on the RIMM are inserted into the correct
side of the socket.
2.
Press the RIMM straight into the socket until the securing tabs snap into place
around the ends of the RIMM.
notches (2)
securing
clips (2)
Figure 1-2. Installing a RIMM
System Memory Upgrade
1-7