Dell Vostro 5480 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Dell Vostro 5480에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Vostro 5480 10 페이지.
Dell Vostro 5480에 대해서도 마찬가지입니다: 소유자 매뉴얼 (45 페이지), 소유자 매뉴얼 (40 페이지), 설정 및 사양 (31 페이지), 외부 디스플레이 연결 매뉴얼 (8 페이지)
페이지 인쇄
- 1. Quick Start Guide
- 2. Before Setting up Your Computer
- 3. Icons, Status Lights and Indicators
- 4. Removing and Replacing a Laptop Computer Battery
- 5. Connecting the Power Supply
- 6. Connect the Network Cable (Optional)
- 7. Press the Power Button on the Computer
- 8. Specifications
- 9. Information for Nom, or Official Mexican Standard (Only for Mexico)
- 10. India Rohs
Setting up Your Computer
This section provides information about setting up your Dell computer.
Before Setting up Your Computer
When positioning your computer, ensure that you allow easy access to a power source,
adequate ventilation, and a level surface to place your computer.
Restricting airflow around your computer may cause it to overheat. To prevent overheating
ensure that you leave at least 10.2 cm (4 inches) at the back of the computer and a minimum of
5.1 cm (2 inches) on all other sides. You should never place your computer in an enclosed
space, such as a cabinet or drawer when it is powered on.
WARNING: Do not block, push objects into, or allow dust to accumulate in the air vents.
Do not store your Dell™ computer in a low-airflow environment, such as a closed briefcase,
while it is powered on. Restricting the airflow can damage the computer or cause a fire. The
computer turns on the fan when the computer gets hot. Fan noise is normal and does not
indicate a problem with the fan or the computer.
CAUTION: Placing or stacking heavy or sharp objects on the computer may result in
permanent damage to the computer.
Icons, Status Lights and Indicators
Icons are used to label all connectors and buttons on Dell computers. Check the following table
for a description of those found on your computer.
2 |
P a g e
This document is for regulatory purpose only.
Power/battery status light – Indicates the power state
and battery status.
AC adapter connector - Connects to the AC adapter to
power the computer and charge the battery when the
computer is not in use.
Battery status light – if the power status light does not
provide information on battery charge status, this light
provides information on charge status.
Wireless switch - used to either turn wireless
communication on or off.
-Or-
used to scan the local area for available wireless
signals.
Network connector – Connects your computer to a
network or a broadband device if you are using a wired
network.
VGA connector – Connects to a monitor or projector.