Dell XPS M1210 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Dell XPS M1210에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS M1210 45 페이지.

NOTE:

You can place the new thermal pads directly on any existing thermal pads already installed on the thermal-cooling assembly. It is not necessary

to remove an existing pad or to clean the surface.

b. On the underside of the thermal-cooling assembly, place the thermal pad(s)' adhesive-side on top of the old pad, and press it into place.

thermal pads (3)

NOTE:

When replacing the thermal-cooling assembly, hold up the mylar flap on the thermal-cooling assembly so that the flap rests on top of the fan

when the thermal-cooling assembly is in place.

2. Place the thermal-cooling assembly over the processor.

3. Tighten the four captive screws, labeled "1" through "4," in consecutive order.

4. If present, tighten the single captive screw and engage the securing loop over the video card.

Back to Contents Page

underside of thermal-cooling assembly