Dell Inspiron 410 서비스 매뉴얼 - 페이지 18

{카테고리_이름} Dell Inspiron 410에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 410 46 페이지. Service manual

Back to Contents Page

I/O Bracket

Dell™ Inspiron™ 410 Service Manual

Removing the I/O Bracket

Replacing the I/O Bracket

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

Removing the I/O Bracket

1. Follow the procedures in

Before You

2. Remove the top cover (see

3. Remove the top bracket (see

4. Remove the bottom cover (see

5. Remove the I/O bezel (see

6. Remove the three screws that secure the chassis fan to the I/O bracket.

7. Using a hex nut driver, remove the two hex nut screws that secure the VGA connector to the I/O bracket.

8. Remove the screw that secures the I/O bracket to the chassis.

9. Release the I/O bracket out of the computer cover and lift the I/O bracket out of the computer.

I/O bracket

hex nut screws (2)

Replacing the I/O Bracket

1. Follow the procedures in

Before You

2. Align and insert the tabs on the bottom of the I/O bracket into the slots on the chassis.

Begin.

Removing the Top

Cover).

Removing the Top

Bracket).

Removing the Bottom

Cover).

Removing the I/O

Bezel).

chassis fan screws (3)

I/O bracket screw

Begin.