Dell Inspiron 410 Руководство по эксплуатации - Страница 18
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Настольный компьютер Dell Inspiron 410. Dell Inspiron 410 46 страниц. Service manual
Печатать страницу
Back to Contents Page
I/O Bracket
Dell™ Inspiron™ 410 Service Manual
Removing the I/O Bracket
Replacing the I/O Bracket
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
Removing the I/O Bracket
1. Follow the procedures in
Before You
2. Remove the top cover (see
3. Remove the top bracket (see
4. Remove the bottom cover (see
5. Remove the I/O bezel (see
6. Remove the three screws that secure the chassis fan to the I/O bracket.
7. Using a hex nut driver, remove the two hex nut screws that secure the VGA connector to the I/O bracket.
8. Remove the screw that secures the I/O bracket to the chassis.
9. Release the I/O bracket out of the computer cover and lift the I/O bracket out of the computer.
1
I/O bracket
3
hex nut screws (2)
Replacing the I/O Bracket
1. Follow the procedures in
Before You
2. Align and insert the tabs on the bottom of the I/O bracket into the slots on the chassis.
Begin.
Removing the Top
Cover).
Removing the Top
Bracket).
Removing the Bottom
Cover).
Removing the I/O
Bezel).
2
chassis fan screws (3)
4
I/O bracket screw
Begin.